30# Carbon Steel Coil/Strip
30# Carbon Steel Coil/Strip is a rolled thin-gauge product made from low-to-medium carbon steel with a nominal carbon content of about 0.30%. This carbon level provides a good balance between strength and formability, offering higher strength than very low-carbon strips while retaining good cold working properties and weldability. This coil or strip is often used in the normalized or cold-rolled state. 30# coil/strip is commonly used for manufacturing stamped parts, formed components, tubing, and general structural elements in machinery, automotive, and construction industries where a blend of moderate strength, toughness, and ease of fabrication is necessary.
Tel:86-510-83631415
- Product Description
- Spot Warehouse
- Product Inspection
- Product Measurement
- Product Packaging
-
- Commodity name: 30# Carbon Steel Coil/Strip
30# Carbon Steel Coil/Strip is a rolled thin-gauge product made from low-to-medium carbon steel with a nominal carbon content of about 0.30%. This carbon level provides a good balance between strength and formability, offering higher strength than very low-carbon strips while retaining good cold working properties and weldability. This coil or strip is often used in the normalized or cold-rolled state. 30# coil/strip is commonly used for manufacturing stamped parts, formed components, tubing, and general structural elements in machinery, automotive, and construction industries where a blend of moderate strength, toughness, and ease of fabrication is necessary.
30# Carbon Steel Coil/Strip Description
Applications
Automotive Components Machinery Manufacturing General Engineering Stamping & Forming Tube & Pipe Manufacturing Agricultural Machinery Fastener Production Structural Components Tool Parts (Carburized) Material Handling Product Parameters
Product Name 30# Carbon Steel Coil/Strip Type Coil, Strip, Slit Edge Thickness 0.8mm - 10mm (Typical range for strip/coil) Length Coil weight up to 25 MT (Tonnes) Width 300mm - 1800mm (Standard widths, customizable slitting) Standard GB/T 699 (Equivalent to AISI 1030, JIS S30C, DIN C30, etc.) Surface Black (Hot Rolled), Pickled & Oiled (P&O), Cold Rolled (CR) Scope of Application Used for manufacturing parts with moderate strength requirements, such as small shafts, forgings, moderately stressed machine parts, rods, and general components that may be heat-treated (e.g., normalizing or quenching). Certificate ISO, SGS, BV, LR, etc. Production Technology Hot Rolling (HR), Cold Rolling (CR) Edge Processing Mill Edge, Slit Edge, Deburred Edge Approximate grade comparison table
Standard System UNS GB/T (China) EN (Approx.) SAE/AISI JIS (Approx.) W. Nr. (German) Grade (Approx.) G10300 30 (High Quality Carbon Steel) C30 (1.0501) 1030 S30C 1.0501 Chemical Composition
Element C (Carbon) Mn (Manganese) Si (Silicon) P (Phosphorus) S (Sulfur) Cr (Chromium) Ni (Nickel) Cu (Copper) Composition (wt%) 0.27 - 0.35 0.50 - 0.80 0.17 - 0.37 ≤0.035 ≤0.035 ≤0.25 ≤0.30 ≤0.25 Mechanical Properties
Tensile Strength (Rm) (MPa) Yield Strength (ReH) (MPa) Elongation A5 (%) Hardness (HB) ~450 - 600 ~280 - 380 ≥18 ~140 - 180 Physical Performance
Property Density (g/cm3) Modulus of Elasticity (GPa) Mean Coeff. of Thermal Expansion (10−6/deg C) (20-100 deg C) Thermal Conductivity (W/m.K) (20 deg C) Value (Approx.) ~7.85 200 - 210 ~11.5 ~50 -
30# Carbon Steel Coil/Strip - Stock Warehouse
-
30# Carbon Steel Coil/Strip - Product Inspection
-
30# Carbon Steel Coil/Strip - Product Measurement
-
30# Carbon Steel Coil/Strip- Product Packaging
Taigang Yilian
Your reliable steel supplier
Taigang Yilian has 10+ warehouses with ready stock. The annual supply capacity is approximately 10 million tons. It has 10 years of experience in large-scale project supply. The customer reorder rate reaches 86%. We ensure quality and quantity, provide material certificates, and will refund if the products are not qualified, so please be assured the purchase.
Get A Quote