10# Carbon Steel Coil/Strip
10# Carbon Steel Coil/Strip is a rolled thin-gauge product made from a very low-carbon steel (or mild steel) with a nominal carbon content of approximately 0.10%. This extremely low carbon level provides superior ductility and formability, along with excellent weldability. It is the softest and most easily worked among common carbon steel strips. 10# coil/strip is typically used for applications requiring extensive cold working, such as deep drawing, complex stamping, and bending. It is widely used to manufacture automotive parts, appliance housings, non-critical structural components, containers, and specialized tubing where ease of manufacturing and a fine surface finish are key considerations.
Tel:86-510-83631415
- Product Description
- Spot Warehouse
- Product Inspection
- Product Measurement
- Product Packaging
-
- Commodity name: 10# Carbon Steel Coil/Strip
10# Carbon Steel Coil/Strip is a rolled thin-gauge product made from a very low-carbon steel (or mild steel) with a nominal carbon content of approximately 0.10%. This extremely low carbon level provides superior ductility and formability, along with excellent weldability. It is the softest and most easily worked among common carbon steel strips. 10# coil/strip is typically used for applications requiring extensive cold working, such as deep drawing, complex stamping, and bending. It is widely used to manufacture automotive parts, appliance housings, non-critical structural components, containers, and specialized tubing where ease of manufacturing and a fine surface finish are key considerations.
10# Carbon Steel Coil/Strip Description
Applications
Deep Drawing & Stamping Automotive Body Panels Appliance Manufacturing Sheet Metal Fabrication Tube & Pipe Manufacturing Container Manufacturing General Engineering Structural Cladding Piping Components Agricultural Equipment Product Parameters
Product Name 10# Carbon Steel Coil/Strip Type Coil, Strip, Slit Edge Thickness 0.4mm - 6mm (Typical range for strip/coil) Length Coil weight up to 25 MT (Tonnes) Width 300mm - 1500mm (Standard widths, customizable slitting) Standard GB/T 699 (Equivalent to AISI 1010, JIS S10C, DIN C10, etc.) Surface Black (Hot Rolled), Pickled & Oiled (P&O), Cold Rolled (CR), Bright Finish Scope of Application Ideal for applications requiring high formability, deep drawing, and excellent weldability. Used for stamped parts, automotive inner panels, appliance components, fasteners, and casings. Certificate ISO, SGS, BV, ABS, DNV, etc. Production Technology Hot Rolling (HR), Cold Rolling (CR) Edge Processing Mill Edge, Slit Edge, Edging Approximate grade comparison table
Standard System UNS GB/T (China) EN (Approx.) SAE/AISI JIS (Approx.) W. Nr. (German) Grade (Approx.) G10100 10 (High Quality Carbon Steel) C10 (1.0301) 1010 S10C 1.0301 Chemical Composition
Element C (Carbon) Mn (Manganese) Si (Silicon) P (Phosphorus) S (Sulfur) Cr (Chromium) Ni (Nickel) Cu (Copper) Composition (wt%) 0.07 - 0.14 0.35 - 0.65 0.17 - 0.37 ≤0.035 ≤0.035 ≤0.15 ≤0.20 ≤0.20 Mechanical Properties
Tensile Strength (Rm) (MPa) Yield Strength (ReH) (MPa) Elongation A5 (%) Hardness (HB) ~360 - 480 ~180 - 260 ≥28 ~100 - 130 Physical Performance
Property Density (g/cm3) Modulus of Elasticity (GPa) Mean Coeff. of Thermal Expansion (10−6/deg C) (20-100 deg C) Thermal Conductivity (W/m.K) (20 deg C) Value (Approx.) ~7.85 ~ 200 ~11.5 ~50 -
10# Carbon Steel Coil/Strip - Stock Warehouse
-
10# Carbon Steel Coil/Strip - Product Inspection
-
10# Carbon Steel Coil/Strip - Product Measurement
-
10# Carbon Steel Coil/Strip- Product Packaging
Taigang Yilian
Your reliable steel supplier
Taigang Yilian has 10+ warehouses with ready stock. The annual supply capacity is approximately 10 million tons. It has 10 years of experience in large-scale project supply. The customer reorder rate reaches 86%. We ensure quality and quantity, provide material certificates, and will refund if the products are not qualified, so please be assured the purchase.
Get A Quote