430 Stainless Steel Coil
430 Stainless Steel Coil is a general purpose, non-hardenable ferritic stainless steel containing 16%-18% Chromium. It is magnetic.It offers good corrosion and oxidation resistance in mild environments, superior thermal conductivity to austenitic grades, and is the most cost-effective stainless steel for non-critical uses.This grade is essential for applications demanding moderate corrosion resistance and a good finish at a lower cost, primarily in kitchen appliances (refrigerator panels, oven liners, dishwasher linings), automotive trim and exhaust parts, and general architectural and decorative trim.
Tel:86-510-83631415
- Product Description
- Spot Warehouse
- Product Inspection
- Product Measurement
- Product Packaging
-
- Commodity name: 430 Stainless Steel Coil
430 Stainless Steel Coil is a general purpose, non-hardenable ferritic stainless steel containing 16%-18% Chromium. It is magnetic.It offers good corrosion and oxidation resistance in mild environments, superior thermal conductivity to austenitic grades, and is the most cost-effective stainless steel for non-critical uses.This grade is essential for applications demanding moderate corrosion resistance and a good finish at a lower cost, primarily in kitchen appliances (refrigerator panels, oven liners, dishwasher linings), automotive trim and exhaust parts, and general architectural and decorative trim.
430 Stainless Steel Coil Description
Applications
Appliance Trim Automotive Trim Dishwasher Linings Refrigerator Panels Stove Trim Fasteners Decorative Architecture Chimney Liners Food Service Equipment Industrial Kitchen Equipment Product Parameters
Product Name
430 Stainless Steel Coil
Type
Steel Coil
Thickness
2.5mm-10.0mm
Length
2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc.
Width
610mm-2000mm
Standard
ASTM, AISI, JIS, GB, DIN, EN, etc.
Surface
BA, 2B, NO.1, NO.4, 4K, HL, 8K, etc.
Scope of Application
Widely used in high temperature and electrical industry, medical equipment construction, chemical, food industry, agriculture and ship parts, food and beverage packaging,
Kitchen supplies, trains, airplanes, conveyor belts, vehicles, bolts, nuts, springs and screens, etc.
Certificate
ISO, SGS, BV, etc.
Production Technology
Hot Rolling, Cold Rolling
Edge Processing
Edging, Trimming
Approximate grade comparison table
UNS GB JIS DIN EN GOST 430 10Cr17 / S43000 SUS430 S43000 X6Cr17 1.4016 (X6Cr17) Chemical Composition
C
Si
Mn
Cr
Ni
S
P
≤ 0.12
≤1.0
≤1.0
16.0～18.0
≤0.75
≤ 0.03
≤ 0.04
Mechanical Properties
Tensile Strength Kb (MPa)
Yield Strength σ0.2 (MPa)
Elongation D5 (%)
Hardness
≥634
≥440
≥20
Annealing≤ 223HB; quenching and tempering ≥ 192HB
Physical Performance
Density(g/cm³)
Modulus of Elasticity(Gpa)
Coefficient of Thermal Expansion(10-6/°C)
Coefficient of Thermal Conductivity(W/m*K)
Resistivity(ΜΩ. cm)
7.70
200
10.4
23.9
360
-
430 Stainless Steel Coil - Stock Warehouse
-
430 Stainless Steel Coil - Product Inspection
-
430 Stainless Steel Coil - Product Measurement
-
430 Stainless Steel Coil- Product Packaging
Taigang Yilian
Your reliable steel supplier
Taigang Yilian has 10+ warehouses with ready stock. The annual supply capacity is approximately 10 million tons. It has 10 years of experience in large-scale project supply. The customer reorder rate reaches 86%. We ensure quality and quantity, provide material certificates, and will refund if the products are not qualified, so please be assured the purchase.
Get A Quote