10# Carbon Steel Plate
10# Carbon Steel Plate is a very low-carbon steel (or mild steel) with a nominal carbon content of approximately 0.10%. This low carbon level ensures the plate has superior ductility and formability, along with excellent weldability. While it has the lowest strength among common carbon steels, its high softness and ease of fabrication are key advantages. 10# plate is typically used in the as-rolled condition and is favored for applications where deep drawing, bending, or extensive shaping is required, such as sheet metal work, non-critical stampings, containers, brackets, and general purpose structural elements where low cost and easy manufacturing are the primary considerations.
Tel:86-510-83631415
- Product Description
- Spot Warehouse
- Product Inspection
- Product Measurement
- Product Packaging
-
- Commodity name: 10# Carbon Steel Plate
10# Carbon Steel Plate is a very low-carbon steel (or mild steel) with a nominal carbon content of approximately 0.10%. This low carbon level ensures the plate has superior ductility and formability, along with excellent weldability. While it has the lowest strength among common carbon steels, its high softness and ease of fabrication are key advantages. 10# plate is typically used in the as-rolled condition and is favored for applications where deep drawing, bending, or extensive shaping is required, such as sheet metal work, non-critical stampings, containers, brackets, and general purpose structural elements where low cost and easy manufacturing are the primary considerations.
10# Carbon Steel Plate Description
Applications
Deep Drawing & Stamping Sheet Metal Fabrication Automotive Body Panels Appliance Manufacturing General Construction Structural Cladding Agricultural Equipment Container Manufacturing Piping & Tubing General Engineering Product Parameters
Product Name 10# Carbon Steel Plate Type Plate, Sheet, Strip Thickness 0.5mm - 50mm (Customizable) Length 2000mm, 6000mm, 9000mm, 12000mm, etc. (Customizable) Width 1000mm, 1250mm, 1500mm, 2000mm, 2500mm, etc. (Customizable) Standard GB/T 699 (Equivalent to AISI 1010, JIS S10C, DIN C10, etc.) Surface Clean, Black painted, Pickled, Bright Finish Scope of Application Primarily used for stamping parts, shallow drawn parts, thin plates for automotive and structural use, casings, washers, and other components requiring high plasticity and good weldability. Certificate ISO, SGS, BV, ABS, DNV, etc. Production Technology Hot Rolling, Cold Rolling Edge Processing Shearing, Slitting, Edging Approximate grade comparison table
Standard System UNS GB/T (China) EN (Approx.) SAE/AISI JIS (Approx.) W. Nr. (German) Grade (Approx.) G10100 10 (High-quality carbon structural steel) C10 (1.0301) 1010 S10C 1.0301 Chemical Composition
Element C (Carbon) Mn (Manganese) Si (Silicon) P (Phosphorus) S (Sulfur) Cr (Chromium) Ni (Nickel) Cu (Copper) Composition (wt%) 0.07 - 0.14 0.35 - 0.65 0.17 - 0.37 ≤0.035 ≤0.035 ≤0.15 ≤0.20 ≤0.20 Mechanical Properties
Tensile Strength (Rm) (MPa) Yield Strength (Rp0.2) (MPa) Elongation A5 (%) Hardness (HB) ~360 - 480 ~180 - 260 ≥28 ~100 - 130 Physical Performance
Property Density (g/cm3) Modulus of Elasticity (GPa) Mean Coeff. of Thermal Expansion (10−6/deg C) (20-100 deg C) Thermal Conductivity (W/m.K) (20 deg C) Value (Approx.) ~7.85 ~200 ~11.5 ~50 -
10# Carbon Steel Plate - Stock Warehouse
-
10# Carbon Steel Plate - Product Inspection
-
10# Carbon Steel Plate - Product Measurement
-
10# Carbon Steel Plate- Product Packaging
Taigang Yilian
Your reliable steel supplier
Taigang Yilian has 10+ warehouses with ready stock. The annual supply capacity is approximately 10 million tons. It has 10 years of experience in large-scale project supply. The customer reorder rate reaches 86%. We ensure quality and quantity, provide material certificates, and will refund if the products are not qualified, so please be assured the purchase.
Get A Quote